How to install a wooden fence

Measure the fencing area

We must correctly measure the space we want to fence to acquire the correct number of posts and fences. Small stakes can be placed to help us mark the line of the fence or even use stones or taut ropes. Opt for a good segmentation if you want to get good results!

Cut the posts

First we will measure the height of the slats or posts and then proceed to cut them using a saw or a miter saw. All must be equally high for the finish to be perfect and thus create a solid structure that will last us for many years. It is not recommended to make measurements by eye, better to use a meter and not vision.

Nailing the pegs

Once the previous step is finished, we can proceed to nail the pegs in the designated places on the perimeter. If we nail them in depth we will have the security that they will be well fixed. Then simply insert the posts inside and secure them with screws. The pegs fulfill the important mission of properly fixing your fence.

Distribute the posts

After nailing the pegs, it's time to prepare the posts destined for that terrain. It should not be repaired in its number, since if there are few the fence will be flimsy and if we exceed it it will not be either aesthetic or decorative. All must be well inserted into the pegs and make sure of this before placing the fences.

Paint the precast fences

Before placing the fences we must paint or varnish them. This will not only give them a beautiful aesthetic, but will also serve as protection and will act as an excellent insulator. The paint or varnish must be suitable for exteriors and of quality so that it does not suffer leaks, such as the autoclave 3.

Place the brackets

The brackets are the pieces that will join and fix the fence to the posts. It is important that they are well aligned and well screwed. We can use different elements to check its leveling and, at least, there must be two brackets on each post. The higher the pole the greater number of squares it must have.

Place the fences

The next step is to place the prefabricated fences between the posts, so it is essential that the entire space is perfectly measured, so that the structure fits seamlessly. Make sure that the fences are suitable for the environment of your garden and if the chosen height is the correct one for the use you are going to give it.

Fit hinges and latches

Finally, we should not forget the latch, which will allow us to easily access and exit the fence. To do this we must first screw some hinges and finally the latch. The quality of the materials must be high so that the climatic conditions do not affect them too much.

One last brycus tip is that if you have thought about installing a fence that is to be enjoyed for many years, it is better to opt for quality materials. It is also important to choose a good wood, such as autoclave treated 3. Protection and quality are also great allies, encourage with fencing!