How to fix pool tiles

The maintenance of these tiles is essential, not only for aesthetic reasons, but also for functionality, since it is essential to avoid leaks.

Learn with these Poolfunstore tips how to repair cracks and detachment of tiles to beautify your pool and help prevent further damage.

Step 1: review and planning to repair

Firstly, we are going to gather the work elements that will help us in the repair, that is, the mixture and the application tools. The mixture is the solution used to seal, glue and waterproof, while the application tools will facilitate the task of correctly spreading the material on the surface. You can use a basic toolbox piece like the spatula for this.

Some new tile pieces are also needed to replace the broken and missing ones when repairing the leak.

Step 2: clearing the ground

The most important part of this phase is to correctly close the fissure, even if it is small, as it is the way to make sure to prevent larger cracks.

Before doing so, you must completely empty and dry the surfaces, especially the one to be treated.

Use a chisel to remove all of the tile surrounding the crack. The idea is to form a square or rectangle free of tiles on the surface and we will work on this.

Step 3: preparing the area to apply

With the work space cleared, we proceed to make a "V" channel, this phase is preparation to apply the sealing mixture or treatment product.

For the preparation we can use a medium width spatula.

Step 4: preparation application

Now, yes, it is time to apply the preparation. Whatever it is, it is important to respect the indications of the product, not only to achieve a good waterproof effect, but also to avoid premature wear due to misapplication.

Generally, the mixture should be consistent, with the texture of a conventional paste. The entire cleared surface must be filled with this for best results. Use only the right amount (at least 3 millimeters thick), no more, no less.

Step 5: tile replacement

Since we have reserved new parts for replacement, it is time to adhere them to the surface and for this you will use cement or glue. The use of glue type cement is very common.

Keep in mind that you can apply the cement with a normal spatula, but if you want more ease you can use the toothed spatula to hold it in place.

The following Poolfunstore tips have to do with the final finish: make this step as clean as possible so that the small tiles look their original appearance, without ugly cement stains.

Step 6: finishing touches

Details matter, especially in crystal clear areas like the pool. If you are looking for perfection, use something to level the new pieces of tiles, a stoneware mesh will do.

Apply a layer of special mix that adds white color between the tiles. Don't get stuck with the gray appearance of glue cement. Provides a little uniformity to the result.

Finally, you can use another waterproof mixture this time as the last layer. This last procedure is essential for the prevention of new leaks.

Step 7: drying time

Do not despair, give the material time to dry properly. Wait at least 48 hours before entering water into the pool, so you will enjoy a safer evening and your work will remain intact for a long time.

As you can now see, there is an interesting maintenance and preventive work behind the beauty of home pools. Although these tricks can also be adjusted to professional pools or establishments.

In any case, you must have the appropriate equipment, that is, tools such as a chisel, hammer, smooth or corrugated spatula; in addition to multiple preparations that will help you repair and replace tiles easily with few instructions.