Booths: pre-assembly tips

There are many models of sheds, depending on the material in which they are made, we can mention the wooden ones, the resin ones or the metallic ones, there are also them for different uses, for example those that we install in our gardens or those that require preparation for another type of function.

If we consider installing a booth by our own hands, we must have the foresight to follow certain Brycus tips that can facilitate our task, speed up work time and enjoy a meticulous result.

Thinking of you, we have dedicated ourselves to preparing a list of steps that will help you in the moment prior to assembly, they are elements that you should not neglect to ensure the proper assembly of the structure that you have purchased.

The most important Brycus tips that you should consider or plan to comply with before assembling our booth are:

• Determine the location in which you are going to install your new booth, it should not hinder the free movement of people or the movement of vehicles, it should also be considered that it does not prevent access to other areas or objects. It is also important to consider the use that you are going to give it, if it is intended to store objects, it is very important that the house is located in such a way that large implements can be stored and removed easily and without any impediment.

• Analyze the convenience of a booth with independent electricity, practically for any use that we dedicate to our new booth, it is necessary to have some lighting, remember that it is not a huge palace so it does not require great work, just a few small panels are enough solar or a mini wind generator, so we can save many of the costs associated with a conventional electrical installation.

• Verify that the firmness and leveling of the land where we are going to install the house, a house in unstable terrain is not a very good idea, ideally it should be seated on a concrete slab suitable for its area and dimensions, the provision of a drainage system would not hurt.

• Firmness in its fixation to the ground it is not necessary to speak much at this point, just imagine what could happen if it is not properly anchored to the ground and there is a strong gust of wind, it is recommended not to expose our house in places exposed to its action and ensure a good hold in its location to avoid accidents or losses.

• Respect minimum distances from the house with structures or objects that are nearby, to prevent indoor humidity in our house, it is convenient to keep it away from walls, bushes and the like, at least 50 meters, with this we will also manage to avoid undesirable condensation and a good setup.

• Follow the manufacturer's recommendations so you will be sure of a good assembly, following each of the steps explained in the instructions guarantees that we will do a good job.

• Check if you require an installation license for the booth and all the regulations that refer to the subject, before buying a new one, go to the nearest Town Hall to your house and find out all the necessary information.

• Choose the model that best suits your needs in the market, you can get a wide variety of them, so it is important to choose the one that meets all the conditions you are looking for.

• Get all the tools and equipment necessary for the installation ready so you won't have to abandon your project to rush out to buy something last minute, a previous preparation of everything you need is a convenient forecast before starting work.

• Plan your time well and each of the activities, a good organization and planning will never be an excess.

Following this step by step before installing your new house you will have the desired success. We hope these Brycus tips have been helpful and to your liking.