How to install a decorative waterfall in your pool HTML view Note Featured keywords

The mechanism that makes this a reality is prefabricated in stainless steel, for a longer duration, and also has beautiful shapes in its design to make it a decorative object and at the same time functional.

The operation of the waterfall is very simple: the mechanism takes the water from the pool itself, and this is done by means of a pump and suction intake. The water passes through short PVC pipes to be expelled into the pool itself. The system has a switch and button. As simple as that.

To enjoy such a wonderful waterfall you only need to make some elements:

1. Stainless steel waterfall:

This element is screwed to the ground and its manufacturing material is optimal for water treated with saline chlorination.

2. Pipe with a diameter of 50 or 63, depending on the flow power:

It is essential that this pipe is of good quality so that it resists corrosion and the rigors of the weather.

3. Two PVC ball valves:

The function of this valve is to control the flow of water. It must resist pressure and flow.

4. A minimum 3/4 self-priming pump:

The pump is the heart of this system. She is in charge of taking the water from the pool and expelling it with the necessary force. It is bolted to the ground, is robust and must be connected to an electrical source.

5. Some PVC elbows:

Whenever a PVC piping system is installed, it is very safe to use elbows to bring the pipes to where they are needed. They must also be resistant.

6. A suction socket for water cannon:

This shot is the one that will collect water from the pool to take it to the canyon, helped by the pump. This outlet features a grille that can be easily detached by removing two screws.

7. A switch and a pneumatic button:

Like all the other elements, these must also be of high quality because the safety factor in this case is essential. These devices will be in charge of turning the pump on and off, which will put the system into operation, and since it is in the presence of water, it should not cause short circuits or failures.

8. Tube to drive air from the pneumatic push button:

The pump also needs to be fed with air in order to work. For this, a tube is required that offers it, and that does not fracture due to the effect of the sun or wear.

With all these elements, your pool will exhibit a new and beautiful decoration and will also provide the opportunity to be a spa that offers you massages with water jets.

Now go to the links where you can find all these products that will make your pool your favorite place!