Detachable Oval Pool with Reinforced Steel Wall Bestway Hydrium 610x360x120 cm with Sand Treatment Plant of 5 678 L/H, Floor Mat, Cover and Ladder

Features:

Measurement: 610X360x120 cm.

Shape: Oval

Color: Grey.

Water capacity: 19,929 L.

Sand treatment plant: 5,678 L/H.

Metal structure resistant to corrosion.

Material: Galvanized steel and interior with Prismatic Stone™ to prevent discoloration or cracks caused by the sun.

Content: 1 pool, 1 sand treatment plant, 1 ladder, 1 floor mat, 1 blanket and 1 chlorine dispenser.

Easy to install.

Recommendations:

* Install on a solid, level surface. Avoid sand or asphalt surfaces.** Do not install the pool on high balconies/terraces.*** Install near water intakes, currents and drains.

Pool maintenance

Chlorine tablets must be poured into a dispenser so that they dissolve depending on the water's needs

To keep the water in good condition, it is necessary to add chlorine tablets chlorine and anti-algae.

It is recommended to have a leaf collector to collect the dirt that falls on the water.

It is advisable to have a pH meter to measure the acidity and alkalinity of the water.

It is recommended to use a mat to protect the base of the pool.

Good pH control is essential for proper water maintenance.

The pool cleaner should be chosen based on the power of the purifier you have for your pool.

You should use the necessary products to increase or reduce the pH level of your pool. pool as needed.

Chlorine is essential for the disinfection and maintenance of pool water.

Chlorine should not be poured directly into the bottom of the pool, as it can damage the liner.

The chlorine level must be between 0.6 and 1.5 ppm, although it must be adapted to the surface of each pool.

The flocculant will help you keep the water clean, since it precipitates the particles that are suspended in the water.

While the flocculant is being applied, the treatment plant should not be running.

Once the pool is emptied, it is essential to clean all the walls and the floor correctly. Once everything is clean, you have to leave the liner extended until it is completely dry.

The ground where the pool is going to be placed should not be hard or rough. It should be smooth and completely flat. It should not be mounted on wood or sand.

It is very important that moisture does not accumulate in the ground on which the pool is placed to avoid fungi that can damage the pool.